NEWS
NEWS

Position:Home > en > NEWS

Air cooler introduction 2018/01/26
Air cooler, referred to as air cooler, with air as a coolant, can be used as a cooler, can also be used as a condenser. Air cooler mainly by the tube bundle, brackets and fans. Air Cooler Hot fluid flows through the tube, blowing ...
Air cooler structure 2018/01/26
High-quality air coolers mainly by the tube bundle, fan and frame 3 parts. Tube bundle includes heat transfer tube, tube box, side beams and beams. It can be horizontal, vertical and inclined top (Homo-type) layout of the three ba...
Air cooler ventilation 2018/01/26
Ventilation and induced draft two ways: ① blast-style: the first air flow through the fan into the tube bundle. ② wind-induced type: air flow through the first tube into the fan. The former operating costs more economical, the tur...
Air cooler classification and features 2018/01/26
Air cooler according to different occasions, can be divided into power plant air cooler and petrochemical air cooler. By cooling, can be divided into dry, wet, and dry - wet combined air cooler. Wet air cooler Wet air coolers can ...
Air cooler fin tube introduction 2018/01/26
Air cooler fin tube of the basic form are: sets of films, around the sheet, rolled sheet, welded sheet, oval tube, insert film, turbulence, spoke, slotted form of corrugated form. The main structure of the air cooler tube box flan...
How to clean the air cooler 2018/01/26
Because most of the cooling water contains calcium, magnesium ions and acid carbonate. When cooling water flows through the metal surface, there is carbonate formation. In addition, the oxygen dissolved in the cooling water can al...
Air cooler layout requirements 2018/01/26
Air cooler layout of the general requirements: 1. Air cooler (hereinafter referred to as air cooler) should be arranged on the leeward side of the annual minimum frequency wind direction; 2. Air cooler should be arranged above the...
Air cooler tube plate welding structure welding process 2018/01/26
Air-cooled tube plate welded joints for the butt joints, pass the ball required to pass the experiment, the root of penetration, no cracks and unfused defects, and the joint strength should be greater than or equal to the strength...
Air cooler types and what are the requirements 2018/01/26
For the air cooler, the following will be involved in the problem, there are two main, specifically as follows: Question 1: What are the types of air coolers? Which one is the most basic? Question two: air cooler frame, water tray...